How to Use
How to Use The Magic Pen
Follow these 6 simple steps for professional results in under 2 minutes.
Step 1
Prime the tip
Before applying, press the tip firmly on a piece of paper or cardboard 5–10 times until the liquid flows evenly. This primes the pen and ensures a consistent application.
Step 2
Clean the area
Wash and dry the scratched surface thoroughly. Remove any dirt, grease, or wax. The cleaner the surface, the better the result.
Step 3
Apply directly on the scratch
Hold the pen at a 45° angle and apply the liquid directly on the scratch with light, even strokes. Do not press too hard — let the liquid do the work.
Step 4
Let dry
Wait 30 to 60 seconds for the formula to dry. Do not touch or rub during this time.
Step 5
Wipe off excess
Using a clean microfiber cloth, gently wipe off any excess product with circular motions. The scratch should be significantly reduced or invisible.
Step 6
Repeat if needed
For deeper scratches, repeat the process 2–3 times. Allow each coat to dry fully before reapplying.
⚠️ Important tips
- Do not apply in direct sunlight or on a hot surface — work in the shade for best results
- Not suitable for plastic trim, rubber seals, or unpainted surfaces
- Store the pen horizontally with the cap on when not in use
- One application covers 10–15cm of surface scratch
Still have questions about application?
🚗 Fix your scratches today
Professional results in under 2 minutes. Ships worldwide.
Get The Magic Pen →Want to check your delivery status? Track your order here